ANSWERS: 1
-
sure... i'll be glad to... on the back of the sub... there should be a rca jack connection... i think you know what it looks like... o.k... go to the local radioshack... and pick up a mono rca cable... with the sub unplugged... make the connection on the speaker... next... on the receiver... there should be a rca jack marked sub... connect it... that's it... try it out... and enjoy, now... if you have the push quick terminals... the it's the soam thing... get you a rca male connector... and 25 feet of 18 gage speaker wire... and head home, now... copper is always positive... strip the wires 1/4 inch... solder the copper wire to the center of the rca... and the silver wire to the other connector... put the wire through the outside of the rca plug... and connect. if you have the quick push connector... just run the copper wire the the positive speaker... the silver to the negivive... and the same on the receiver... and enjoy, yes... i know... there's 3 ways of doing it... i don't know what you have... i'm not there... but... those are the 3 main ways of doing it... o.k.
Copyright 2023, Wired Ivy, LLC