Chevrolet Corvette category

Chevrolet Corvette category

Posted by robbyd4 some time ago

I have 1975 corvette stingray, i have replaced the fuel gauge and sending unit, and the wires look ok. although the tank is empy, when i turn the key, fuel gauge displays full. how do i fix this problem, thanks

Posted by Richard some time ago

I have a 1970 corvette, 350-350. There is a sensor in right cylinder head and no wires going to it. What is this sensor? The temp sensor is in the left cylinder head.

Posted by GTX5244 some time ago

1989 Corvette FX3, rear shocks, how to change them is there a procedure?

Posted by Anonymous some time ago

Trouble starting '84 Corvette (5.7 liter). Cold starts are no problem, but if driving some where and engine is turned off, it won't start when coming back to the car. Any idea what the problem is and is this common? Thanks!

Posted by Big Mac some time ago

I am in the process of purchasing my 1st Corvette. I am looking at 2 certified cars. The first one is a '07 6.0 Ltr coup Z51 performance package, LT3 w/Nav. 8,642 miles Vs. an '08 6.2 Ltr, LT3 w/Nav 4220 miles no Z51. Pricing similar. Which would you buy?

Posted by ronald49 some time ago

Where is crankshaft position sensor located on 1998 corvette

Posted by SlickRick some time ago

I just purchased a 1987 corvette coupe, I noticed that in traffic temp is climbing to 200 degree range. What is normal operating temp?

Posted by Pony some time ago

We have a 1986 chevy corvette and want to change the fuel filter.do I need to take of the wheel well cover to remove and replace the fuel filter?

Posted by Anonymous some time ago

I have a 1978 Corvette 350 engine.When it sits for 2 to 3 days I have to pump the gas pedal about 20 times. After 3 days I have to prime the carb. I have a new fuel pump,a new rebuilt quadrajet carb & a check valve in the line to hold the gas in. Thanks!

Copyright 2023, Wired Ivy, LLC

Answerbag | Terms of Service | Privacy Policy